Product ID:CONCRETE PRIMER RESIN
MSDS Date:04/25/1990
FSC:8010
NIIN:00F027515
MSDS Number: BQZRB

DEVCON CORP

30 ENDICOTT ST
DANVERS, MA 01923-3753
US

Emergency Phone: 508-777-1100

Info Phone: 508-777-1100

Cage: 16059

DEVCON CORP

DANVERS, MA 01923-3753 US

Telephone: 1-508-777-1100

Cage: 16059

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 30-60%

BUTYRIC ACID LACTONE, TETRAHYDRO-2-FURANONE, BLO

CAS: 96-48-0

RTECS: LU3500000

Fraction By Weight: 1-5%

LD50 LC50 Mixture:ORAL LD50 (RAT): 2,000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INGESTION:
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, & DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SENSITIZATION, ITCHING, SWELLING, RASH
&/OR OTHER ALLERGY-LIKE SYMPTOMS.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA, OR OTHER SKIN
DISORDERS

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS WHILE HOLDING
EYELIDS OPEN. SKIN: WASH W/PLENTY OF SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT.
INGESTION: DON'T INDUCE VOMITING. GIVE VICTIM TWO GLASSES OF MILK
OR WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TOC
Flash Point:<200F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING. WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO
COOL CONTAINERS, DISPERSE VAPORS & FLUSH SPILLS.
Unusual Fire/Explosion Hazard:HEAT OF FIRE MAY CAUSE CONTAINERS TO
BURST.

Spill Release Procedures:SCRAPE UP AS MUCH MATERIAL AS POSSIBLE & PLACE
IN SUITABLE, LABELED CONTAINER FOR WASTE DISPOSAL. RESIDUE MAY BE
REMOVED USING A SAFETY SOLVENT.

Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAME & HIGH TEMPERATURES.
Other Precautions:AVOID SKIN CONTACT & BREATHING OF VAPORS.

Respiratory Protection:DUST MASKS SHOULD BE WORN DURING ANY GRINDING OR
MACHINING PROCEDURES ON CURED RESINS. ORGANIC VAPOR RESPIRATORS MAY
BE REQUIRED IN CONFINED AREAS.
Ventilation:GOOD GENERAL IS USUALLY ADEQUATE FOR MOST INDUSTRIAL
APPLICATIONS
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES OF GOGGLES
Other Protective Equipment:LONG-SLEEVE & LONG LEG CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. PRACTICE GOOD HOUSEKEEPING PROCEDURES.
Supplemental Safety and Health
LD50 INFORMATION IS FOR BUTYROLACTONE.

Boiling Pt:B.P. Text:400F
Spec Gravity:1.55
pH: 7
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT GRAY LIQUID W/MILD EPOXY ODOR

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS
Stability Condition to Avoid:OPEN FLAMES, SPARKS, EXTREME HEAT
Hazardous Decomposition Products:CO, CO2, ALDEHYDES, & ACIDS

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.